Building Code Requirements for Masonry Structures (ACI 530-99/ ASCE 5-99/TMS 402-99), Specification for Masonry Structures (ACI 530.1-99/ ASCE 6-99/TMS 602-99), Commentary on Building Code Requirements for Masonry Structures, Commentary on Specification for Masonry Structures
Building Code Requirements for Masonry Structures (ACI 530-99/ASCE 5-99/TMS 402-99), Specification for Masonry Structures (ACI 530.1-99/ASCE 6-99/TMS 602-99), Commentary on Building Code...

Quality Check
Composite materials, also known as fiber reinforced polymers (FRPs), have traditionally been reserved for aerospace engineering applications because of their high cost. FRPs'...

The Viable Alternative
The Benicia-Martinez Bridge is a high-level, welded deck truss bridge that carries Interstate 680 over the eastern end of the Carquinez Strait near San Francisco. To bring the bridge into...

Evaluation of KeySystem I Retaining Wall
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report describes an evaluation to determine...

Forging Ahead
More than a dozen bridges in the United States have been built using HPS 70W grade steel, which has a yield strength of 485 MPa (70 ksi) but superior toughness compared to conventional...

High Strength Concrete
This proceedings, High Strength Concrete, consists of papers presented at the first Engineering Foundation Conference on High Strength Concrete,...

Up against the Wall (available in Geoenvironmental special issue only)
A tight site in Portland, Oregon, bounded by existing roads and a light rail line and bordered by underground utilities, required project engineers to develop a new type of shoring wall...

Special Geotechnical Testing: Central Artery/Tunnel Project in Boston, Massachusetts
The Central Artery/Tunnel Project (CA/T) in Boston, Massachusetts, is the largest urban highway construction project in the history of the interstate system. The magnitude and complexity...

Making the Grade
A new grade of high performance steel, HPS-70W, allows engineers to design tougher, lighter structures. The high performance weathering steel has a yield strength of 70 ksi, or 485 MPa....

Stretching a Landfill
Landfill expansions can pose engineering challenges, and the Tullytown, Pa., landfill gives an example of a horizontal expansion that added 121 acres of future disposal space. The side-by-side...

The Search for HPC (Available in Structural Engineering Special Issue only)
High-performance concrete (HPC) is often overlooked by engineers because its properties are not well documented. Concrete Clinic International conducted a study to learn more about the...

Paper Mill Sludge Landfill Cover Construction
A considerable amount of experience has been acquired from a number of completed paper mill sludge landfill covers within the United States. This paper focuses on practical guidelines...

Geotechnical Performance of a Highway Embankment Constructed Using Waste Foundry Sand
A highway embankment was constructed near Auburn, Indiana, using waste foundry sand (WFS) as a demonstration project for the Indiana Department of Transportation (INDOT). Laboratory testing...

Utilization of Lagoon-Stored Lime in Embankment Construction
The maximum percentage of lime that can be mixed with a predetermined borrow material to build the proposed road embankment without adversely affecting the physical and mechanical properties...

Role of Constituents on the Behavior of Flowable Fly Ash Fill
Flowable fills are increasingly used as backfill materials for pipes and retaining structures because of ease of placement and performance of the solidified material. But the role of its...

The Safe Disposal of Fly Ash in Pavement or Earth Structures Not Requiring High Strength Materials
Highway agencies throughout the country face the challenge of safe disposal of various waste products in pavements and earth structures. Some of these waste products can be hazardous to...

Crushed Hydrated Fly Ash as a Construction Aggregate
Hydrated fly ash (HFA) is being produced in Texas by first adding water to Class C fly ash and allowing it to hydrate in curing pits for several weeks. HFA typically attain unconfined...

Alaska's Last Link
Alaska's Seward Highway has been upgraded this past year. The last section of the highway dates back to the state's early mining days in the Kenai Peninsula,...

On Solid Ground (Available only in the Geoenvironmental Special Issue)
On four transportation projects in Portland, Ore., soil nails and micropiles are used as alternatives to conventional earth-retention and foundation systems. The use of soil nails and...

Fathoming the Strength of Structures
More and more, the owners of bridges and piers are budgeting rehabilitations based on inspections done underneath the waterline. Increasingly, they want the underwater inspectors to be...

 

 

 

 

Return to search